| Title | Description | Unit | UF-618M |
| Genaral | Standard Mag Chuck | mm | 150×450 |
| Max Grinding Capacity (L x W) | mm | 480×178 | |
| Table to Spindle Center | mm | 460 | |
| Longitudinal | Manual Travel | mm | 510 |
| Hydraulic Traverse | mm | 480 | |
| Hydraulic Motor | Hp | 1 | |
| Cross Movement | Cross Feed (Manual / Auto) | mm | 195×180 |
| Hand Feed / Revolution | mm | 5 | |
| Hand Feed / Graduation | mm | 0.02 | |
| Continuous Cross Feed (60Hz) | mm/min | 20~320 | |
| Incremental Cross Feed | mm/min | 0.5~10 | |
| Cross Feed Motor | W | 40 | |
| Down Feed | Rapid Feed (Slow Feed) | mm/min | 230 (29) |
| Hand Feed / Revolution | m/min / rpm | 1 | |
| Hand Feed / Graduation | – | 0.005 | |
| Spindle | Grinding Wheel (Dia x Width x Bore) | mm | 203×12.7×31.75 |
| Spindle Speed (60Hz) | rpm | 3450 | |
| Spindle Drive Motor | Hp | 2.0 |